In This Tutorial You Will Learn the Following: *How to Have a Multi-Colored Sig *How to Lightly Brush *How to Use The Blending Options Step 1 Were Going To Start Off With Brushing. So Open Up A New Document. Im Going To Be Making An Avitar But You Can Make W/e You Would Like, Works The Same Way. Im Using The The Size 40x40. Now Make A New Layer By Press Ctrl + Shift + N. Im Going To Use Some Abstract Brushes, But Grunge or Fractals Work Fine Too. So Start Brushing WIth Some Black And then Some White. Dont Over Do it. Just Do About 1 or 2 Clicks With Each Color. Now This is What i have: What My Layers Look Like: Step 2 Now Keep Repeating Step 1 So That You Have About 4 or 5 layers. Remember To Use Different Brushes And Dont Put Too Much On 1 Layer. I have 4 Layers. This is what i have: Layers: Step 3 Time For The Color. Right Click On The First Layer. Click Blending Options And Go To Color Overlay. This Is What i Used For MY Settings: Now Do The Same With The Other Layers But Mix The Colors Up. Im Going To Use: Red For The First Layer Green For The Second Blue For The Third Ornage For the Fourth This Is What I Have So Far: Layers: Step 4 Now i Went Back And Changed Some of My Blending Options. Now Make A New Layer By Press Ctrl + Shift + N. Now Go To: Image>>Apply Image>> Ok Now Go To Filter>> Sharpen>> Sharpen Slap Some Text On There And Wahlah. A Multi-Colored Sig. ****Optional Make A New Layer. Add An Applied Image Again. Go to: Filter>>Blur>>Gaussion Blur Use A Radius from 1.5 to 2.5 Click Ok. Now Find A Blending Mode That Suites You. Im Going To Use Vivid Light. This is The Final OutCome i had With Text. Now Remember. Different Blending Modes Will Affect Your Outcome. As Well As Different Brushes. Do it A Couple Of Times First So You Get The Hang of it. Then About Your 3rd One It Should Be Awesome.
