Cpu + Mainboard Advise...

Discussion in 'Gaming' started by Goldman, Feb 17, 2006.

  1. Goldman

    Goldman Well-Known Member

    Posts:
    764
    Likes Received:
    0
    Joined:
    Oct 11, 2004
    Heyy Dudes,

    I am looking for some advice, I need a new :

    - CPU - Socket 939
    - Mainboard - Socket 939/PCI-X/SLI (not needed) and it must also be able to set some good overclock settings. Pref, a passive cooled South brigde (not really needed)

    Price around $300-450

    This PC is gonna work as a server/Media center

    I now have
    - 6600 PCI-E
    - 2 NIC's
    - SATA 250 GB
    - 2GB DDR RAM
    - DVD-ROM
     
  2. xlink

    xlink GR's Tech Enthusiast

    Posts:
    8,054
    Likes Received:
    3
    Joined:
    Nov 19, 2004
    if you OC, then go for the opertron 165, it OCs really well

    if you don't OC try the Athlon X2 4200+ it performs at more or less the sam level as the 4400+, but is cheaper. If you want to save some cash, go for the x2 3800+.
     
  3. Goldman

    Goldman Well-Known Member

    Posts:
    764
    Likes Received:
    0
    Joined:
    Oct 11, 2004
    The problem with opertron is that it is a 940 and not a 939.
     
  4. .DeFuZioN

    .DeFuZioN Well-Known Member

    Age:
    36
    Posts:
    2,260
    Likes Received:
    0
    Joined:
    Oct 7, 2005
    Location:
    Australia
    the 165 opteron is 939 pin. PCI-X isnt out yet. only pci-e is.

    The 4200+ doesnt perform like a 4400+, in cpu intensive tasks a 1mb cache is equivalent to a 200mhz performance increase over the similar 512kb cache.

    As you are going to overclock I suggest the DFI LanPary Ultra-D Which can be modded with a lead pencil to support SLI. If you want something a little cheaper look into an ASRock 939Dual-SATA2
     
  5. Goldman

    Goldman Well-Known Member

    Posts:
    764
    Likes Received:
    0
    Joined:
    Oct 11, 2004
    I was more thinking of a AMD Athlon 3000+ or 3500+ and a good mainboard... with a case.
     
  6. xlink

    xlink GR's Tech Enthusiast

    Posts:
    8,054
    Likes Received:
    3
    Joined:
    Nov 19, 2004
    http://www23.tomshardware.com/cpu.html?mod...l2=236&chart=74

    take a look at the benchmarks on that.typically at the worst, the 4200+ is about 3-4% less powerfull based on the bench mark numbers... but wait... about 1/3 times the 4200+ comes out on top AND when it doesn't it's typically by less than 1 % a vast majority of the time.

    also, goldman, you didn't evn mention a case and why not go dual core? dual core is clearly the future compare the price of the 3200+ with the X2 3800+ you get double the CPU, but it doesn't even cost double if you get a fairly goo deal. That is unheard of in the world of computers. how much does a 1.5 Ghz P4 cost? how much does a 3.0 Ghz P4? how much does a 1.2 Ghz Tbird cost? how much does a 2.4 Ghz Athlon 64 cost.

    also, a case can be really cheap as long as it has acceptable airflow nothing else really matters.


    her's a decent case
    http://www.newegg.com/Product/Product.asp?...N82E16811133134

    get the epuma for a PSU if you need it.

    also, if it's going to be a server/ media center, you will definately ewant it to be dual core, you get huge benifits from that in a server enviroment.

    case 33$
    http://www.newegg.com/Product/Product.asp?...N82E16811133134

    PSU 30$ or 46$
    http://www.newegg.com/Product/CustRatingRe...N82E16817153023
    http://www.newegg.com/Product/Product.asp?...N82E16817101513

    CPU 290$
    http://www.newegg.com/Product/Product.asp?...N82E16819103562
    or the opertron which OC a bit better
    http://www.newegg.com/Product/Product.asp?...N82E16819103588

    Motherboard $130
    http://www.newegg.com/Product/Product.asp?...N82E16813136152

    it's about 30$ over budget, BUT you could knock of most of it if you get a crudier case with an INT PSU

    also, don't get the 3000+ it's 5$ more expensive than the 3200+ I think newegg raised the price on it because so many people where geting it.

    if you don't need extreme OCing then go with cheaper bord though, you could probably knock off about 50$ by using cheaper board.
     
  7. .DeFuZioN

    .DeFuZioN Well-Known Member

    Age:
    36
    Posts:
    2,260
    Likes Received:
    0
    Joined:
    Oct 7, 2005
    Location:
    Australia
    Dont get that thermaltake psu. Thermaltake psu's are not great.

    He cant get the puma as he automatically voids warranty. He needs to get the 480 or 500 Watt Antec Smart Power II as dfi requires at least 480W's.
     
  8. xlink

    xlink GR's Tech Enthusiast

    Posts:
    8,054
    Likes Received:
    3
    Joined:
    Nov 19, 2004
    then swap down for a cheaper motherboard, he's using it as a server so he doesn't really need the extra clock speed, and the extra cores make a huge impact due to the highly threaded nature of running a server.
     

Share This Page